Next Article in Journal
Antibiotic Alternatives: Multifunctional Ultra-Small Metal Nanoclusters for Bacterial Infectious Therapy Application
Previous Article in Journal
Hematene Nanoplatelets with Enhanced Visible Light Absorption; the Role of Aromatic Molecules
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Molecules
Volume 29
Issue 13
10.3390/molecules29133116
molecules-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Flexible Asymmetric Supercapacitors Constructed by Reduced Graphene Oxide/MoO3 and MnO2 Electrochemically Deposited on Carbon Cloth

by
Sha Li
* and
Zhiying Li
Department of Chemistry, **nzhou Teachers University, **nzhou 034000, China
*
Author to whom correspondence should be addressed.
Molecules 2024, 29(13), 3116; https://doi.org/10.3390/molecules29133116
Submission received: 23 May 2024 / Revised: 25 June 2024 / Accepted: 26 June 2024 / Published: 30 June 2024
(This article belongs to the Section Electrochemistry)
Browse Figures
Versions Notes

Abstract

:
A flexible asymmetric supercapacitor (ASC) is successfully developed by using the composite of MoO3 and graphene oxide (GO) electrochemically deposited on carbon cloth (CC) (MoO3/rGO/CC) as the cathode, the MnO2 deposited on CC (MnO2/CC) as the anode, and Na2SO4/polyvinyl alcohol (PVA) as the gel electrolyte. The results show that the introduction of the GO layer can remarkably increase the specific capacitance of MoO3 from 282.7 F g−1 to 341.0 F g−1. Furthermore, the combination of such good electrode materials and a neutral gel electrolyte renders the fabrication of high-performance ASC with a large operating potential difference of 1.6 V in a 0.5 mol L−1 Na2SO4 solution of water. Furthermore, the ASCs exhibit excellent cycle ability and the capacitance can maintain 87% of its initial value after 6000 cycles. The fact that a light-emitting diode can be lit up by the ASCs indicates the device’s potential applications as an energy storage device. The encouraging results demonstrate a promising application of the composite of MoO3 and GO in energy storage devices.

1. Introduction

Supercapacitors (SCs) are a potential energy storage device that have been widely studied due to their high energy density, fast charging and discharging speed, and long cycle life [1,2]. Supercapacitors are widely used in hybrid vehicles, backup energy systems, mobile electronic devices, and more [3]. With the increasing requirement for personal electronics in modern society, to make electronic devices flexible and portable has become the research hotspot at present. Correspondingly, flexible and portable electronic devices need design of a new type of energy storage device different from previous ones [4,5,6,7,8]. Therefore, flexible asymmetric SCs (ASCs) have attracted much attention, because they can provide more energy density compared with symmetric SCs [9,10,11,12,13,14,15].
To fabricate flexible ASCs (FASCs), it is essential and crucial to select the current collector and active materials because they directly affect the performance of FASCs [16,17,18]. As a new flexible conductor, carbon cloth (CC) has received much attention, due to its three-dimensional (3D) network structure and moderate electrochemical stability [19]. By using CC as a substrate, conducting polymers deposited on it has shown high energy density and power density. For example, Horng et al. have prepared polyaniline nanowire/CC nanocomposite electrodes by employing electrochemical deposition, and the PANI had a Cs of 1079 F g−1 [20]. An electrode of CC/MoS2/PANI has been prepared via combining the facile hydrothermal method, and the PANI of this electrode showed a Cs value of 972 F g−1 at 1 A g−1 [21].
Transition metal oxides are the other commonly used electrode materials for SCs; at first, the noble metal oxides such as RuO2 [22], RhOx [23], etc., were extensively studied because of their high faradic capacitance and good conductivity. Despite the excellent capacitive performances, the rarity and high price of precious metal oxides limit their practicality. As a result, many studies have focused on the substitution of precious metal oxides due to their relative theoretical carbon content, availability of inexpensive transition metal oxides, and relative reversibility [24]. At present, layered porous manganese dioxide nanosheets with a maximum Cs of 268 F g−1 have been prepared by the rapid hydrothermal method [25]. Different from the usually used electrode material of MnO2, which possesses a capacitive property at a positive potential range, MoO3 exhibits capacitance at a negative potential range and has attracted much attention [26,27]. Furthermore, the other attractive nature of MoO3 is its particular 2D layered structure, which is conducive to provide high power density for capacitor applications because of the adequate intercalation between the layers and electrolyte ions [28]. Recently, Pujari et al. found that hexagonal MoO3 microrods display a Cs of 194 F g−1 [29,30]. Despite the efforts on MoO3, the Cs values are still not very high due to its low conductivity. Therefore, it is necessary to develop a strategy to prepare the composites with relatively high conductivity by adding some highly conductive materials [22,31,32,33,34]. The co-electrochemical deposition of active materials and carbon materials has been proven to be an effective method in various methods of manufacturing composite materials; as a precursor of graphene, graphene oxide (GO) has attracted great interest in the manufacturing of composite materials due to its ease of operation in aqueous media and high specific surface area [35,36].
In this work, we choose CC as a flexible substrate to deposit MoO3 as a cathode, during which the graphene oxide (GO) is added to form the composite of MoO3 and reduced GO (rGO) through electrochemical co-deposition. The electrode prepared by electrochemically depositing MnO2 on CC is used as an anode, MoO3/rGO/CC as a cathode, and NaSO4/polyvylene oxide as a gel electrolyte and separator to assemble ASCs. By using this strategy, we hope that the FASCs can possess high operating potential differences, energy density, and power density.

2. Results

2.1. Structural Properties’ Characterization of All Samples

Figure 1 depicts a schematic illustration of the procedure for the preparation of electrodes and the device. Based on the flexibility and conductivity of CC, and the potential ranges of electrochemical activity for MoO3 and MnO2 [37,38], the FASCs can be fabricated by using MoO3/rGO/CC as a cathode and MnO2/CC as an anode in a Na2SO4/PVA gel electrolyte.
From the SEM image shown in Figure 2, it is found that fibers contained in CC have a clean surface with some groves (Figure 2A); the diameter of the fibers is relatively uniform and many accumulated pores are observed among the fibers (Figure 2B). When the molybdenum oxide has been electrochemically deposited, the surface of the fiber will be covered by a layer of molybdenum oxide; it can be seen from the image of MoO3/CC (Figure 2C) that the fiber is uniformly wrapped by a layer of molybdenum oxide, but the film has many cracks, which are caused during the drying process. Under the large magnification, a corrugated morphology is observed (Figure 2D); this rough surface structure is favorable to increase the surface area of MoO3. It is worth noting that by changing the film-forming time, the thickness and mass load of the film can be well controlled. When the evaporation time is 1000 s, a “skeleton/skin film” structure is obtained with carbon fiber as the skeleton and MoO3 as the skin film [39,40]. Figure S3 is the SEM image of the MnO2/CC electrode, from which it can be found that MnO2 particles are formed on the CC. In Figure 2E,F, the surface of CC is decorated with rGO flakes, embedded in the enlarged image (Figure 2G), which clearly shows that rGO smooths the surface of the carbon. In addition, uniform rGO nanosheets form a 2D layered structure on the surface of MoO3/rGO/CC, which increases the surface area and improves the electrical conductivity compared with the blank CC. SEM results showed that the surface of the MoO3/CC composite was successfully coated with a layer of rGO.
To confirm the properties of the product, X-ray diffraction was used to evaluate the prepared material. From Figure 3, it can be found that all the samples show obvious peaks related to the substrate of CC or rGO, but no distinguishable peaks can be seen for the components of MoO3 and MnO2, which may be attributed to the fact that the formed MoO3 and MnO2 are amorphous or the crystalline is too small, or the weak diffraction peaks related to MoO3 and MnO2 are covered up by the diffraction peak of C due to the small amount of the active materials [19,41,42,43]. The FTIR spectrum provides details on the band characteristics of composite materials. As shown in Figure S4, no strong characteristic peaks are seen in the wave number ranging from 400 to 2000 cm−1. The spectrum of MoO3/CC shows three main peaks at 955, 826, and 753 cm−1. This is the Mo=O stretching vibration of terminal oxygen and the symmetric and asymmetric stretching vibration of Mo-O-Mo cross-linked oxygen, respectively [44]. However, the IR spectrum for GO/MoO3/CC exhibits the characteristic of rGO [19] besides the MoO3’s characteristics (C=C: 1738 cm−1), confirming that rGO has successfully loaded on the surface of MoO3/CC.
The analysis of the XPS can reveal the chemical states of the samples of MnO2/CC (a), MoO3/rGO/CC (b), MoO3/CC (c), and CC (d) (Figure 4A). All the spectra show the XPS peaks related to the element of Mn or Mo together with that of C and O. Specially, the characteristic doublets of Mn2p (Figure 4B) 2p1/2 (654.1 eV) and Mn2p 2p3/2 (642.4 eV) from MnO2/CC identify the formation of MnO2 due to the difference between the two peaks of 11.7 eV [45]. Similarly, the double peaks observed at 233.0 and 236.2 eV in MoO3/rGO/CC can be contributed to Mo 3d5/2 and Mo 3d3/2, respectively, due to spin-orbit splitting (Figure 4D) [44]. According to the fitted results, it can be found that the components of MoO2 and MoOx are exhibited in the sample besides the component of MoO3 [46]. On the other hand, the above peaks in the Mo 3d spectrum of MoO3/rGO/CC composite materials are shifted by 0.2 eV due to the interaction between rGO and MoO3, to 232.8 eV and 236.0 eV, respectively. The peak intensity of the MoO3/CC spectrum is higher than that of MoO3/rGO/CC.

2.2. The electrochemical Properties of MoO3/rGO/CC

The galvanostatic method is used to deposit MoO3 on the pretreated CC, and the depositing current and depositing time are optimized by changing the current and depositing time. Firstly, the deposition current is optimized in the same deposition solution by changing the current, kee** the depositing charge (Q = 6 C) amount constant. The obtained electrodes’ CV curves are tested by employing a three-electrode system, and according to the formulae shown in the Supplementary Materials, the plot of the Cm value versus the currents is drawn in Figure S1. The Cm value reaches its maximum value of 282.8 F g−1 at 6 mA. Subsequently, the current is fixed at 6 mA to change the deposition time to optimize the time. It can be found in Figure S1B that the maximal Cm value of 283.5 F g−1 is achieved when the depositing time is 1000 s. Therefore, we use the condition of a 6 mA constant current and depositing time of 1000 s to prepare the electrode in the following experiments. For improving the performance, electrodes of MoO3/CC are used as working electrodes to electrochemically deposit the rGO in a different GO solution; from Figure S1C, we can find that when the GO solution is 7.0 mg mL−1, the modified electrode shows the largest Cm value. Therefore, the electrode prepared at the above-mentioned condition will be evaluated in detail.
Figure 5A shows the electrode of MoO3/rGO/CC exhibiting far larger surrounded CV area than MoO3/CC at the same scan rate. The CV curve of the MoO3/rGO/CC electrode shows a similar shape within the range of a potential scanning rate of 5 to 100 mV s−1; based on the curves, the Cm values of MoO3/rGO/CC are calculated and shown in Figure 5C, and it is clear that the Cm values of MoO3/rGO/CC decrease with the increase in the scan rates because of the limited diffusion time for ions when the scan rate is large, and it has the largest Cm value of 341.0 F g−1 that is higher than that of MoO3/CC (282.8 F g−1) at 1 mV s−1, which is believed to be because the conductive rGO flakes on the surface of MoO3 shorten the transport pathways of electrons and electrolyte ions. As the scanning rate increases, the Cm value of MoO3/rGO/CC shows a decreasing trend. The GCD curves of the MoO3/rGO/CC electrode in a potential range of −1.0–0 V (Figure 5D) display almost symmetric shapes at different current densities; the iR drop is small at low current density and increases with the increment of the current densities, and the Cm obtained from the GCD curves are similar to those from CV profiles. The good capacitive performance of MoO3/rGO/CC can be due to the close contact between the carbon fiber and MoO3 layer, in addition to fast and effective charge transfer through a three-dimensional CC framework; graphene oxide sheets coated on MoO3 also provide an electron transfer pathway. At an open circuit potential, the EIS spectrum has been recorded within the frequency range from 100 kHz to 0.01 Hz to reveal the kinetic property of MoO3/rGO/CC.
Regarding the Nyquist curve (Figure 5E), the semicircles in the high-frequency region and the straight peaks in the low-frequency region are clearly seen [45,47,48]. The profile can be fitted by using Zview (2.3.1) software; the Rct value of the GO/MoO3/CC electrode is 1.82 Ω, indicating the enhanced charge transportation provided by the decorated rGO on the surface. The electrochemical stability of the electrodes investigated by successive CV scanning at 100 mV s−1 (Figure 5F), and it is found that MoO3/rGO/CC can retain 88.6%, indicating better cycling stability.

2.3. Electrochemical Performance of the FASC

The anode has been prepared by using CC as a substrate via the electrochemical depositing method. The conditions for depositing MnO2 have been optimized in Supplementary Materials (Figure S2). The electrode prepared at a current of 4 mA for 1000 s exhibits the optimal Cm value (343.3 F g−1), and the electrodes prepared under this condition are further investigated and used to assemble the devices. In a 0.5 mol L−1 Na2SO4 solution, the CV curve of the MnO2/CC electrode exhibits a quasi-rectangular shape at low scanning speeds, indicating excellent performance of MnO2/CC (Figure 6A). It can be easily seen from the curves of Cm and scanning speed that as the scanning speed increases, the Cm value decreases. In 100 mV s−1, the Cm value maintains 45.1% of the maximum Cm value (Figure 6B), demonstrating good rate capability. Based on the results obtained from CV tests in the three-electrode system, the area ratio of MoO3/rGO/CC to MnO2/CC is 1:1. Therefore, the devices are constructed by using the Na2SO4/PVA gel electrolyte to separate the cathode of MoO3/rGO/CC and anode of MnO2/CC. By employing the two-electrode system, we recorded the CV curves in different voltage windows at 20 mV s−1 (Figure 6C,D) to determine the operating potential difference. It is clear that the operating potential difference of the device can be expanded to 1.6 V since MoO3/rGO/CC is −1.0–0 V, while MnO2/CC is 0–1.0 V, which are determined by the three-electrode system [49,50,51]. Notably, the CV curve of the ASC device is similar to the curve observed in the MnO2/CC, maintaining stable redox pairs within 2–100 mV s−1 (Figure 6E), and the scan rate increases and the Cm of ASC decreases at 2 mV s−1 (Figure 6F); the device shows a Cm of 98.3 F g−1 (Ca of 226.4 mF cm−2).
The GCD curve (Figure 7A) shows a quasi-linear symmetric shape, with fast voltage current response and good electrochemical reversibility. Due to the presence of pseudo-capacitance in the device, the result deviates slightly from the straight line. At low current density, the GCD curve shows a tiny decrease in iR. At 1.0 mA cm−2, the device can achieve a Cm of approximately 88.3 F g−1 and Ca of 203.4 mF cm−2. The Cm value of ASC decreases with the increase in current density (Figure 7B), which is analogous to the result of CV.
In order to further investigate the detailed electrochemical characteristics of ASC, we performed EIS experiments (Figure 7C). The result shows that at low frequencies, lines almost perpendicular to the Z′ axis exhibit quite good capacitance characteristics [52,53,54]. After 6000 cycles, the capacitance of the ASC device remained at 88.1% of the initial value and showed good cycling stability, indicating that this type of ASC device has good electrochemical stability (Figure 7D).
In order to evaluate the practical performance of the device, E and P were calculated based on the discharge branch of the GCD curve using the formula provided in the Supplementary Information (Figure 8A). At a P of 533.3 W kg−1, E is 32.1 Wh kg−1. More noteworthy is that when P reaches 5333.3 W kg−1, E remains at 20.2 Wh kg−1. Due to the high electrochemical capacitance and good multiplication ability of the electrode, it is superior to other devices previously reported (Table 1), indicating the potential application of this material. In addition, LEDs can be driven by fully charged series batteries (Figure 8B), indicating the possibility of practicality. By combining the pseudo-capacitive material fully loaded on the CC substrate and mild gel electrolyte, an effective way for preparing high-performance ASC with excellent cycling performance can be obtained.

3. Materials and Methods

3.1. Materials

Manganese (II) acetate (Mn(Ac)2·4H2O), ammonium molybdate [(NH4)2MoO4], ammonium chloride, polyvinyl alcohol (PVA, Mw: 85,000), and sodium sulfate (Na2SO4) were purchased from Aladdin Chemical Co. (Ontario, CA, USA) and used without further purification. The conductive carbon cloth (CC) substrate was obtained from Shanghai Chuxi Industrial Co., Ltd. (Shanghai, China)

3.2. Fabrication of the Electrodes of MnO2/CC and MoO3/rGO/CC

Pretreatment of the CC: CC is made from pre-oxidized polyacrylonitrile fabric that is carbonized or spun from carbon fiber. As a kind of flexible carbon-based template with special porous structure, high electrical conductivity, high mechanical stability, and corrosion resistance, carbon cloth not only has the inherent characteristics of carbon materials, but also has the machinability of fiber materials. It is often used as a substrate to carry active substances and improve the electrochemical performance of capacitors. The commercial CC was first immersed in concentrated nitric acid (HNO3, 68 wt.%) and then heated at 60 °C for about 6 h in a water bath to make the surface hydrophilic. Subsequently, the CC was washed with distilled water thoroughly and then soaked in distilled water for use.
Electrochemically depositing MnO2 on CC: By using a three-electrode system, MnO2/CC was also prepared via an electrodeposition method. In the mixing solution of 15 mL Mn(Ac)2 (0.05 mol L−1) and 15 mL Na2SO4 (0.05 mol L−1), the MnO2 was deposited on the pretreated CC at a constant current of 4.0 mA cm−2 when the CC was used as a working electrode, a Pt plate as a counter electrode, and a saturated calomel electrode (SCE) as a reference electrode, and the amount of MnO2 was controlled by depositing time (600–1400 s). After the deposition process was completed, the electrode of MnO2/CC was washed by deionized water and dried in a vacuum oven at 70 °C overnight. The electrode of MnO2/CC prepared from a different depositing time was defined as MnO2/CC-t (t is the depositing time).
Electrochemically depositing MoO3 on CC: The used electrolyte here (30.0 mL) was an aqueous solution of 15 mL (NH4)2MoO4 (0.05 mol L−1) and 15 mL NH4Cl (0.05 mol L−1) and its pH value was adjusted to 2.0 by acetic acid. The pretreated CC slices (1 × 1 cm2) were used as a working electrode, a Pt sheet as a counter electrode, and a saturated calomel electrode (SCE) as a reference electrode; by using a constant current density of 4 mA cm−2, different amounts of MoO3 were deposited on CC by controlling the depositing time (700–1300 s). According to the capacitance measured by using a three-electrode system in a 0.5 M Na2SO4 electrolyte, the MoO3/CC prepared from 1000 s was used to assemble the ASCs.
Electrochemically depositing MoO3/rGO on CC: First, GO was prepared by oxidizing 300-mesh graphite powder according to the modified hummer method [63]. The sample of MoO3/rGO/CC prepared by using the electrochemical deposition method according to the above was used as a work electrode here to deposit GO on the surface of MoO3/CC by the cyclic voltammetry (CV) method in different concentrations of the GO solution, and the obtained electrode was defined as MoO3/rGO/CC. The appropriate GO in the electrolyte is selected by optimizing the deposition time and the CV number. Place MoO3/rGO/CC in a vacuum oven overnight. The electrochemical performance test was carried out in a three-electrode system after drying.

3.3. Fabrication of the FASC Devices

Gel electrolyte: 1.0 g PVA powders were slowly added into a 10.0 mL solution of Na2SO4 (0.5 mol L−1) under stirring; then, the mixture was heated to 85 °C until the mixture became transparent, and then the solution was naturally cooled to room temperature for utilization.
Assembly of FASC device: Firstly, the CC was first pretreated with HNO3 at 60 °C to remove the sizing agent on the surface of the fibers. Then, MnO2/CC and MoO3/rGO/CC were fabricated using a facile electrodeposition method. MnO2 or MoO3 or rGO was grown on the CC substrate using three-electrode configuration with CC as the working electrode, a Pt piece as the counter electrode, and Hg/HgCl2 as the reference electrode. Finally, MoO3/rGO/CC was used as the negative electrode and MnO2/CC as the positive electrode. According to the capacitance measured by using the three-electrode system, it was clear that the capacitances of the MoO3/rGO/CC negative electrode and MnO2/CC positive electrode could be balanced when geometric area of the two electrodes was the same. When the FASC device was assembled, the Na2SO4/PVA gel electrolyte was uniformly covered on one electrode such as MnO2/CC, and then the other electrode (MoO3/rGO/CC) was placed on the face of MnO2/CC, which was covered by the Na2SO4/PVA gel electrolyte and followed by pressure to bring the two electrodes together; subsequently, the assembled devices were frozen in a refrigerator for 30 min. Finally, the fabrication of FASC was completed after the frozen device was placed at room temperature to unfreeze.

4. Conclusions

A convenient and efficient method for depositing high-active pseudo-capacitive materials on CC (MoO3/rGO/CC and MnO2/CC) has been developed. The introduction of the rGO layer can remarkably improve the specific capacitance of the MoO3 layer on the carbon fibers from 282.7 to 341.0 F g−1. Furthermore, the assembled ASC by using the electrochemically deposited electrodes and neutral gel electrolyte Na2SO4/PVA possesses a large operation potential of 1.6 V, and exhibits a high energy density of 32.08 Wh kg−1 at the power density of 0.53 kW kg−1, and 5.33 Wh kg−1 at 20.2 kW kg−1. Furthermore, the ASC exhibits good cycle ability and the capacitance can maintain 87.1% of its initial value after 6000 cycles. The ability of these two ASC devices connected in series is that they are able to light up an LED, which indicates their potential applications as energy storage devices.

Supplementary Materials

The following supporting information can be downloaded at: https://mdpi.longhoe.net/article/10.3390/molecules29133116/s1, Figure S1. Specific capacitance variations of MoO3/CC versus deposition currents, time, and concentrations of GO. Figure S2. The plots of specific capacitance of MnO2/CC versus depositing currents and times. Figure S3. The SEM images in different magnification for MnO2/CC (A,B). Figure S4. The FTIR spectra of MoO3/CC and MoO3/rGO/CC.

Author Contributions

Data curation, Z.L.; writing—original draft preparation, S.L.; writing—review and editing, S.L. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by the applied Science and technology plan project of **nzhou (20220508) and Scientific and Technological Inno-vation Programs of Higher Education Institutions in Shanxi (No. 2023L295) and the Natural Science Foundation of Shanxi Province (No. 202303021222234).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

The data presented in this study are available either in this article or in the Supplementary Materials.

Acknowledgments

This work was supported by the Institute of Optoelectronic Functional Materials.

Conflicts of Interest

The authors declare no conflicts of interest.

References

  1. He, W.; Wu, B.; Lu, M.; Li, Z.; Qiang, H. Fabrication and Performance of Self-Supported Flexible Cellulose Nanofibrils/Reduced Graphene Oxide Supercapacitor Electrode Materials. Molecules 2020, 25, 2793. [Google Scholar] [CrossRef]
  2. Zhou, G.; Liang, G.; **ao, W.; Tian, L.; Zhang, Y.; Hu, R.; Wang, Y. Porous α-Fe2O3 Hollow Rods/Reduced Graphene Oxide Composites Templated by MoO3 Nanobelts for High-Performance Supercapacitor Applications. Molecules 2024, 29, 1262. [Google Scholar] [CrossRef]
  3. Saha, S.; Samanta, P.; Murmu, N.C.; Kuila, T. A review on the heterostructure nanomaterials for supercapacitor application. J. Energy Storage 2018, 17, 181–202. [Google Scholar] [CrossRef]
  4. Liu, Z.; Xu, J.; Chen, D.; Shen, G. Flexible electronics based on inorganic nanowires. Chem. Soc. Rev. 2015, 44, 161–192. [Google Scholar] [CrossRef]
  5. Kim, B.C.; Hong, J.; Wallace, G.G.; Park, H.S. Recent Progress in Flexible Electrochemical Capacitors: Electrode Materials, Device Configuration, and Functions. Adv. Energy Mater. 2015, 5, 1500959. [Google Scholar] [CrossRef]
  6. Wang, X.; Lu, X.; Liu, B.; Chen, D.; Tong, Y.; Shen, G. Flexible Energy-Storage Devices: Design Consideration and Recent Progress. Adv. Mater. 2014, 45, 4763–4782. [Google Scholar] [CrossRef] [PubMed]
  7. Lu, X.; Yu, M.; Wang, G.; Tong, Y.; Li, Y. Flexible solid-state supercapacitors: Design, fabrication and applications. Energy Environ. Sci. 2014, 7, 2160–2181. [Google Scholar] [CrossRef]
  8. Li, L.; Wu, Z.; Yuan, S.; Zhang, X.-B. Advances and challenges for flexible energy storage and conversion devices and systems. Energy Environ. Sci. 2014, 7, 2101–2122. [Google Scholar] [CrossRef]
  9. He, W.D.; Wang, C.G.; Li, H.Q.; Deng, X.L.; Xu, X.J.; Zhai, T.Y. Ultrathin and Porous Ni3S2/CoNi2S4 3D-Network Structure for Superhigh Energy Density Asymmetric Supercapacitors. Adv. Energy Mater. 2017, 7, 1700983. [Google Scholar] [CrossRef]
  10. Guan, C.; Zhao, W.; Hu, Y.; Lai, Z.; Li, X.; Sun, S.; Zhang, H.; Cheetham, A.K.; Wang, J. Cobalt oxide and N-doped carbon nanosheets derived from a single two-dimensional metal–organic framework precursor and their application in flexible asymmetric supercapacitors. Nanoscale Horiz. 2017, 2, 99–105. [Google Scholar] [CrossRef]
  11. Jabeen, N.; Hussain, A.; **a, Q.Y.; Sun, S.; Zhu, J.W.; **a, H. High-Performance 2.6 V Aqueous Asymmetric Supercapacitors based on In Situ Formed Na0.5MnO2 Nanosheet Assembled Nanowall Arrays. Adv. Mater. 2017, 29, 1700804. [Google Scholar] [CrossRef] [PubMed]
  12. El-Kady, M.F.; Kaner, R.B. Scalable fabrication of high-power graphene micro-supercapacitors for flexible and on-chip energy storage. Nat. Commun. 2013, 4, 1475. [Google Scholar] [CrossRef] [PubMed]
  13. Gwon, H.; Kim, H.-S.; Lee, K.U.; Seo, D.-H.; Park, Y.C.; Lee, Y.-S.; Ahn, B.T.; Kang, K. Flexible energy storage devices based on graphene paper. Energy Environ. Sci. 2011, 4, 1277–1283. [Google Scholar] [CrossRef]
  14. Lee, S.W.; Kim, B.-S.; Chen, S.; Shao-Horn, Y.; Hammond, P.T. Layer-by-Layer Assembly of All Carbon Nanotube Ultrathin Films for Electrochemical Applications. J. Am. Chem. Soc. 2009, 131, 671–679. [Google Scholar] [CrossRef] [PubMed]
  15. Zhu, Y.; Murali, S.; Stoller, M.D.; Ganesh, K.J.; Cai, W.; Ferreira, P.J.; Pirkle, A.; Wallace, R.M.; Cychosz, K.A.; Thommes, M.; et al. Carbon-Based Supercapacitors Produced by Activation of Graphene. Science 2011, 332, 1537–1541. [Google Scholar] [CrossRef] [PubMed]
  16. Staaf, L.; Lundgren, P.; Enoksson, P. Present and future supercapacitor carbon electrode materials for improved energy storage used in intelligent wireless sensor systems. Nano Energy 2014, 9, 128–141. [Google Scholar] [CrossRef]
  17. Huang, Y.; Huang, Y.; Zhu, M.S.; Meng, W.J.; Pei, Z.X.; Liu, C.; Hu, H.; Zhi, C.Y. Magnetic-Assisted, Self-Healable, Yarn-Based Supercapacitor. ACS Nano 2015, 9, 6242–6251. [Google Scholar] [CrossRef] [PubMed]
  18. Wang, M.; Yan, Q.; Xue, F.; Zhang, J.; Wang, J. Design and synthesis of carbon nanotubes/carbon fiber/reduced graphene oxide/MnO2 flexible electrode material for supercapacitors. J. Phys. Chem. Solids 2018, 119, 29–35. [Google Scholar] [CrossRef]
  19. Ling, J.; Zou, H.; Yang, W.; Chen, W.; Lei, K.; Chen, S. Facile fabrication of polyaniline/molybdenum trioxide/activated carbon cloth composite for supercapacitors. J. Energy Storage 2018, 20, 92–100. [Google Scholar] [CrossRef]
  20. Horng, Y.-Y.; Lu, Y.-C.; Hsu, Y.-K.; Chen, C.-C.; Chen, L.-C.; Chen, K.-H. Flexible supercapacitor based on polyaniline nanowires/carbon cloth with both high gravimetric and area-normalized capacitance. J. Power Sources 2010, 195, 4418–4422. [Google Scholar] [CrossRef]
  21. Zhang, H.; Qin, G.; Lin, Y.; Zhang, D.; Liao, H.; Li, Z.; Tian, J.; Wu, Q. A novel flexible electrode with coaxial sandwich structure based polyaniline-coated MoS2 nanoflakes on activated carbon cloth. Electrochim. Acta 2018, 264, 91–100. [Google Scholar] [CrossRef]
  22. Mendoza-Sánchez, B.; Brousse, T.; Ramirez-Castro, C.; Nicolosi, V.; Grant, P.S. An investigation of nanostructured thin film α-MoO3 based supercapacitor electrodes in an aqueous electrolyte. Electrochim. Acta 2013, 91, 253–260. [Google Scholar] [CrossRef]
  23. Liu, T.; Pell, W.; Conway, B. Self-discharge and potential recovery phenomena at thermally and electrochemically prepared RuO2 supercapacitor electrodes. Electrochim. Acta 1997, 42, 3541–3552. [Google Scholar] [CrossRef]
  24. Klink, M.; Makgae, M.; Crouch, A. Physico-chemical and electrochemical characterization of Ti/RhOx–IrO2 electrodes using sol–gel technology. Mater. Chem. Phys. 2010, 124, 73–77. [Google Scholar] [CrossRef]
  25. Zhang, X.; Yu, P.; Zhang, H.; Zhang, D.; Sun, X.; Ma, Y. Rapid hydrothermal synthesis of hierarchical nanostructures assembled from ultrathin birnessite-type MnO2 nanosheets for supercapacitor applications. Electrochim. Acta 2013, 89, 523–529. [Google Scholar] [CrossRef]
  26. Cao, X.; Zheng, B.; Shi, W.; Yang, J.; Fan, Z.; Luo, Z.; Rui, X.; Chen, B.; Yan, Q.; Zhang, H. Reduced graphene oxide-wrapped MoO3 composites prepared by using metal–organic frameworks as precursor for all-solid-state flexible supercapacitors. Adv. Mater. 2015, 27, 4695–4701. [Google Scholar] [CrossRef]
  27. Barzegar, F.; Bello, A.; Momodu, D.Y.; Dangbegnon, J.K.; Taghizadeh, F.; Madito, M.J.; Masikhwa, T.M.; Manyala, N. Asymmetric supercapacitor based on an α-MoO3 cathode and porous activated carbon anode materials. RSC Adv. 2015, 5, 37462–37468. [Google Scholar] [CrossRef]
  28. Zhang, Y.; Lin, B.; Wang, J.; Han, P.; Xu, T.; Sun, Y.; Zhang, X.; Yang, H. Polyoxometalates@Metal-Organic Frameworks Derived Porous MoO3@CuO as Electrodes for Symmetric All-Solid-State Supercapacitor. Electrochim. Acta 2016, 191, 795–804. [Google Scholar] [CrossRef]
  29. Li, J.; Liu, X. Preparation and characterization of α-MoO3 nanobelt and its application in supercapacitor. Mater. Lett. 2013, 112, 39–42. [Google Scholar] [CrossRef]
  30. Pujari, R.B.; Lokhande, V.C.; Kumbhar, V.S.; Chodankar, N.R.; Lokhande, C.D. Hexagonal microrods architectured MoO3 thin film for supercapacitor application. J. Mater. Sci. Mater. Electron. 2015, 27, 3312–3317. [Google Scholar] [CrossRef]
  31. Liang, R.; Cao, H.; Qian, D. MoO3 nanowires as electrochemical pseudocapacitor materials. Chem. Commun. 2011, 47, 10305–10307. [Google Scholar] [CrossRef] [PubMed]
  32. Li, G.-R.; Wang, Z.-L.; Zheng, F.-L.; Ou, Y.-N.; Tong, Y.-X. ZnO@MoO3 core/shell nanocables: Facile electrochemical synthesis and enhanced supercapacitor performances. J. Mater. Chem. 2011, 21, 4217–4221. [Google Scholar] [CrossRef]
  33. Wang, S.; Dou, K.; Dong, Y.; Zou, Y.; Zeng, H. Supercapacitor based on few-layer MoO3 nanosheets prepared by solvothermal method. Int. J. Nanomanuf. 2016, 12, 404. [Google Scholar] [CrossRef]
  34. Icaza, J.C.; Guduru, R.K. Characterization of α-MoO3 anode with aqueous beryllium sulfate for supercapacitors. J. Alloys Compd. 2017, 726, 453–459. [Google Scholar] [CrossRef]
  35. Huang, M.; Li, F.; Dong, F.; Zhang, Y.X.; Zhang, L.L. MnO2-based nanostructures for high-performance supercapacitors. J. Mater. Chem. A 2015, 3, 21380–21423. [Google Scholar] [CrossRef]
  36. Yao, W.; Wang, J.; Li, H. Flexible α-MnO2 paper formed by millimeter-long nanowires for supercapacitor electrodes. J. Power Sources 2014, 247, 824–830. [Google Scholar] [CrossRef]
  37. Chang, J.; **, M.; Yao, F.; Kim, T.H.; Le, V.T.; Yue, H.; Gunes, F.; Li, B.; Ghosh, A.; **e, S.; et al. Asymmetric Supercapacitors Based on Graphene/MnO2 Nanospheres and Graphene/MoO3 Nanosheets with High Energy Density. Adv. Funct. Mater. 2013, 23, 5074–5083. [Google Scholar] [CrossRef]
  38. Greiner, M.T.; Helander, M.G.; Tang, W.-M.; Wang, Z.-B.; Qiu, J.; Lu, Z.-H. Universal energy-level alignment of molecules on metal oxides. Nat. Mater. 2011, 11, 76–81. [Google Scholar] [CrossRef] [PubMed]
  39. Zhang, Z.; Chi, K.; **ao, F.; Wang, S. Advanced solid-state asymmetric supercapacitors based on 3D graphene/MnO2 and graphene/polypyrrole hybrid architectures. J. Mater. Chem. A 2015, 3, 12828–12835. [Google Scholar] [CrossRef]
  40. Lu, K.; Song, B.; Li, K.; Zhang, J.; Ma, H. Cobalt hexacyanoferrate nanoparticles and MoO3 thin films grown on carbon fiber cloth for efficient flexible hybrid supercapacitor. J. Power Sources 2017, 370, 98–105. [Google Scholar] [CrossRef]
  41. Han, S.; Lin, L.; Zhang, K.; Luo, L.; Peng, X.; Hu, N. ZnWO4 nanoflakes decorated NiCo2O4 nanoneedle arrays grown on carbon cloth as supercapacitor electrodes. Mater. Lett. 2017, 193, 89–92. [Google Scholar] [CrossRef]
  42. Li, Z.; Ding, Y.; **ong, Y.; Yang, Q.; **e, Y. One-step solution-based catalytic route to fabricate novel α-MnO2hierarchical structures on a large scale. Chem. Commun. 2005, 7, 918–920. [Google Scholar] [CrossRef] [PubMed]
  43. Noh, J.; Yoon, C.-M.; Kim, Y.K.; Jang, J. High performance asymmetric supercapacitor twisted from carbon fiber/MnO2 and carbon fiber/MoO3. Carbon 2017, 116, 470–478. [Google Scholar] [CrossRef]
  44. Jiang, F.; Li, W.; Zou, R.; Liu, Q.; Xu, K.; An, L.; Hu, J. MoO3/PANI coaxial heterostructure nanobelts by in situ polymerization for high performance supercapacitors. Nano Energy 2014, 7, 72–79. [Google Scholar] [CrossRef]
  45. Choi, B.G.; Yang, M.; Hong, W.H.; Choi, J.W.; Huh, Y.S. 3D macroporous graphene frameworks for supercapacitors with high Energy and Power Densities. ACS Nano 2012, 6, 4020–4028. [Google Scholar] [CrossRef] [PubMed]
  46. Zhou, K.; Zhou, W.; Liu, X.; Sang, Y.; Ji, S.; Li, W.; Lu, J.; Li, L.; Niu, W.; Liu, H.; et al. Ultrathin MoO3 nanocrystalsself-assembled on graphene nanosheets via oxygen bonding as supercapacitor electrodes of high capacitance and long cycle life. Nano Energy 2015, 12, 510–520. [Google Scholar] [CrossRef]
  47. Cao, H.; Wu, N.; Liu, Y.; Wang, S.; Du, W.; Liu, J. Facile synthesis of rod-like manganese molybdate crystallines with two-dimentional nanoflakes for supercapacitor application. Electrochim. Acta 2017, 225, 605–613. [Google Scholar] [CrossRef]
  48. Senthilkumar, B.; Selvan, R.K. Hydrothermal synthesis and electrochemical performances of 1.7V NiMoO4⋅xH2O||FeMoO4 aqueous hybrid supercapacitor. J. Colloid Interface Sci. 2014, 426, 280–286. [Google Scholar] [CrossRef]
  49. Lv, Q.Y.; Wang, S.; Sun, H. Solid-State Thin-Film Supercapacitors with Ultrafast Charge/Discharge Based on N-Doped-Carbon-Tubes/Au-Nanoparticles-Doped-MnO2 Nanocomposites. Nano Lett. 2016, 16, 40–47. [Google Scholar] [CrossRef]
  50. Cheng, J.; Sprik, M. Alignment of electronic energy levels at electrochemical interfaces. Phys. Chem. Chem. Phys. 2012, 14, 11245–11267. [Google Scholar] [CrossRef]
  51. Lee, J.S.; Shin, D.H.; Jang, J. Polypyrrole-coated manganese dioxide with multiscale architectures for ultrahigh capacity energy storage. Energy Environ. Sci. 2015, 8, 3030–3039. [Google Scholar] [CrossRef]
  52. Lee, J.S.; Shin, D.H.; Jun, J.; Lee, C.; Jang, J. Fe3O4/Carbon Hybrid Nanoparticle Electrodes for High-Capacity Electrochemical Capacitors. ChemSusChem 2014, 7, 1676–1683. [Google Scholar] [CrossRef] [PubMed]
  53. Kim, S.-K.; Kim, Y.K.; Lee, H.; Lee, S.B.; Park, H.S. Back Cover: Superior Pseudocapacitive Behavior of Confined Lignin Nanocrystals for Renewable Energy-Storage Materials (ChemSusChem 4/2014). ChemSusChem 2014, 7, 1196. [Google Scholar] [CrossRef]
  54. Li, S.; Chang, Y.; Han, G.; Song, H.; Chang, Y.; **ao, Y. Asymmetric supercapacitor based on reduced graphene oxide/MnO2 and polypyrrole deposited on carbon foam derived from melamine sponge. J. Phys. Chem. Solids 2019, 130, 100–110. [Google Scholar] [CrossRef]
  55. Du, P.; Wei, W.; Liu, D.; Kang, H.; Liu, C.; Liu, P. Fabrication of hierarchical MoO3–PPy core–shell nanobelts and “worm-like” MWNTs–MnO2 core–shell materials for high-performance asymmetric supercapacitor. J. Mater. Sci. 2018, 53, 5255–5269. [Google Scholar] [CrossRef]
  56. Duay, J.; Gillette, E.; Liu, R.; Lee, S.B. Highly flexible pseudocapacitor based on freestanding heterogeneous MnO2/conductive polymer nanowire arrays. Phys. Chem. Chem. Phys. 2012, 14, 3329–3337. [Google Scholar] [CrossRef] [PubMed]
  57. Fan, H.; Niu, R.; Duan, J.; Liu, W.; Shen, W. Fe3O4@Carbon nanosheets for all-solid-state supercapacitor electrodes. ACS Appl. Mater. Interfaces 2016, 8, 19475–19483. [Google Scholar] [CrossRef] [PubMed]
  58. Choi, B.G.; Chang, S.-J.; Kang, H.-W.; Park, C.P.; Kim, H.J.; Hong, W.H.; Lee, S.; Huh, Y.S. High performance of a solid-state flexible asymmetric supercapacitor based on graphene films. Nanoscale 2012, 4, 4983–4988. [Google Scholar] [CrossRef] [PubMed]
  59. **, Y.; Chen, H.; Chen, M.; Liu, N.; Li, Q. Graphene-patched CNT/MnO2 nanocomposite papers for the electrode of high-performance flexible asymmetric supercapacitors. ACS Appl. Mater. Interfaces 2013, 5, 3408–3416. [Google Scholar] [CrossRef]
  60. Liu, W.; Li, X.; Zhu, M.; He, X. High-performance all-solid state asymmetric supercapacitor based on Co3O4 nanowires and carbon aerogel. J. Power Sources 2015, 282, 179–186. [Google Scholar] [CrossRef]
  61. Gao, H.; **ao, F.; Ching, C.B.; Duan, H. Flexible all-solid-state asymmetric supercapacitors based on free-standing carbon nanotube/graphene and Mn3O4nanoparticle/graphene paper electrodes. ACS Appl. Mater. Interfaces 2012, 4, 7020–7026. [Google Scholar] [CrossRef] [PubMed]
  62. Li, M.; Tang, Z.; Leng, M.; Xue, J. Flexible solid-state supercapacitor based on graphene-based hybrid films. Adv. Funct. Mater. 2014, 24, 7495–7502. [Google Scholar] [CrossRef]
  63. **e, Y.; Cheng, Z.; Guo, B.; Qiu, Y.; Fan, H.; Sun, S.; Wu, T.; **, L.; Fan, L. Preparation of activated carbon paper by modified Hummer’s method and application as vanadium redox battery. Ionics 2015, 21, 283–287. [Google Scholar] [CrossRef]
Molecules 29 03116 g001
Figure 1. Schematic diagram for preparing MoO3/rGO/CC and MnO2/CC electrodes and assembled ASC.
Figure 1. Schematic diagram for preparing MoO3/rGO/CC and MnO2/CC electrodes and assembled ASC.
Molecules 29 03116 g001
Molecules 29 03116 g002
Figure 2. The SEM images in different magnification for CC (A,B), MoO3/CC (C,D), MoO3/rGO/CC (E,F), and inset of the enlarged image (G).
Figure 2. The SEM images in different magnification for CC (A,B), MoO3/CC (C,D), MoO3/rGO/CC (E,F), and inset of the enlarged image (G).
Molecules 29 03116 g002
Molecules 29 03116 g003
Figure 3. The XRD patterns of CC, MnO2/CC, MoO3/CC, and MoO3/rGO/CC (A); the magnified XRD patterns for MoO3/CC and MoO3/rGO/CC in the range of 10–50° (B).
Figure 3. The XRD patterns of CC, MnO2/CC, MoO3/CC, and MoO3/rGO/CC (A); the magnified XRD patterns for MoO3/CC and MoO3/rGO/CC in the range of 10–50° (B).
Molecules 29 03116 g003
Molecules 29 03116 g004
Figure 4. (A) The whole XPS spectra for MnO2/CC (a), MoO3/CC (b), MoO3/rGO/CC (c), and CC (d); (B) the high-resolution XPS for Mn2p in MnO2/CC; (C) the C1s XPS for MnO2/CC; (D) the high-resolution XPS for Mo3d in MoO3/rGO/CC; (E) the C1s XPS; and (F) N1s XPS for MoO3/rGO/CC.
Figure 4. (A) The whole XPS spectra for MnO2/CC (a), MoO3/CC (b), MoO3/rGO/CC (c), and CC (d); (B) the high-resolution XPS for Mn2p in MnO2/CC; (C) the C1s XPS for MnO2/CC; (D) the high-resolution XPS for Mo3d in MoO3/rGO/CC; (E) the C1s XPS; and (F) N1s XPS for MoO3/rGO/CC.
Molecules 29 03116 g004
Molecules 29 03116 g005
Figure 5. Electrochemical behaviors of the MoO3/rGO/CC electrode: (A) CV curves of CC, MoO3/CC, and MoO3/rGO/CC; (B) CV curves for the MoO3/rGO/CC electrode at different scan rates; (C) the plot of the Cm values versus scan rate for MoO3/rGO/CC; (D) GCD curves of the MoO3/rGO/CC electrode at different current densities (a–g represent GCD curves with current density of 1–7 mA cm−2, respectively); (E) EIS spectra for the MoO3/rGO/CC electrode (inset of E: equivalent circuit diagram of Nyquist plots); (F) the plot of capacitance versus the cyclic number for MoO3/rGO/CC. The electrolyte is a 0.5 mol L−1 Na2SO4 aqueous solution.
Figure 5. Electrochemical behaviors of the MoO3/rGO/CC electrode: (A) CV curves of CC, MoO3/CC, and MoO3/rGO/CC; (B) CV curves for the MoO3/rGO/CC electrode at different scan rates; (C) the plot of the Cm values versus scan rate for MoO3/rGO/CC; (D) GCD curves of the MoO3/rGO/CC electrode at different current densities (a–g represent GCD curves with current density of 1–7 mA cm−2, respectively); (E) EIS spectra for the MoO3/rGO/CC electrode (inset of E: equivalent circuit diagram of Nyquist plots); (F) the plot of capacitance versus the cyclic number for MoO3/rGO/CC. The electrolyte is a 0.5 mol L−1 Na2SO4 aqueous solution.
Molecules 29 03116 g005
Molecules 29 03116 g006
Figure 6. (A) CV curves for MnO2/CC at different scan rates (a-g represent scan rates of 5, 10, 20, 40, 60, 80, and 100 mV s−1, respectively), (B) the plot of Cm of MnO2/CC versus the scan rates, (C) the CV curves of the positive and negative electrodes in the three-electrode system at a scan rate of 20 mV s−1, (D) the FASC’s CV curves recorded at various potential difference windows at 20 mV s−1 (a-d represent 0–1.4, 1.6, 1.8, and 2.0 V, respectively), (E) the FASC’s CV curves recorded at different scan rates (a–g represent scan rates of 2, 5, 10, 20, 50, 80, and 100 mV s−1, respectively), (F) the plot of the FASC’s Cm based on active material versus scan rates.
Figure 6. (A) CV curves for MnO2/CC at different scan rates (a-g represent scan rates of 5, 10, 20, 40, 60, 80, and 100 mV s−1, respectively), (B) the plot of Cm of MnO2/CC versus the scan rates, (C) the CV curves of the positive and negative electrodes in the three-electrode system at a scan rate of 20 mV s−1, (D) the FASC’s CV curves recorded at various potential difference windows at 20 mV s−1 (a-d represent 0–1.4, 1.6, 1.8, and 2.0 V, respectively), (E) the FASC’s CV curves recorded at different scan rates (a–g represent scan rates of 2, 5, 10, 20, 50, 80, and 100 mV s−1, respectively), (F) the plot of the FASC’s Cm based on active material versus scan rates.
Molecules 29 03116 g006
Molecules 29 03116 g007
Figure 7. (A) GCD curves of ASC recorded at different current densities (a-h represent current densities of 1.0, 2.0, 3.0, 4.0, 6.0, 8.0, 10.0, and 12.0 mA cm−2), (B) the plot of specific capacitances versus current densities, (C) Nyquist plots for the ASC of MoO3/rGO/CC//MnO2/CC, (D) the plot of the capacitance of ASC versus the cyclic number.
Figure 7. (A) GCD curves of ASC recorded at different current densities (a-h represent current densities of 1.0, 2.0, 3.0, 4.0, 6.0, 8.0, 10.0, and 12.0 mA cm−2), (B) the plot of specific capacitances versus current densities, (C) Nyquist plots for the ASC of MoO3/rGO/CC//MnO2/CC, (D) the plot of the capacitance of ASC versus the cyclic number.
Molecules 29 03116 g007
Molecules 29 03116 g008
Figure 8. (A) The Ragone plots for ASC of MoO3/rGO/CC//MnO2/CC and some other devices from the previous literature for comparison [55,56,57,58,59,60,61,62]; (B) the photograph of an LED lit by two cells connected in series.
Figure 8. (A) The Ragone plots for ASC of MoO3/rGO/CC//MnO2/CC and some other devices from the previous literature for comparison [55,56,57,58,59,60,61,62]; (B) the photograph of an LED lit by two cells connected in series.
Molecules 29 03116 g008
Table 1. Comparison of the energy density and cyclic stability of the ASCs.
Table 1. Comparison of the energy density and cyclic stability of the ASCs.
Electrode MaterialsElectrolyteEnergy Density (Wh kg−1)Stability (Capacitance
Retention %, Cycles)		Ref.
MoO3-PPy/CNTs-MnO2Na2SO4/PVA gel21.076.0, 10,000 cycles[55]
MnO2@PEDOT/PEDOTLiClO4/PMMA gel9.886.0, 1250 cycles[56]
Fe3O4 embedded in
carbon nanosheet/porous carbon		KOH/PVA gel18.370.8, 5000 cycles[57]
Graphene (IL-CMG)/RuO2-IL-CMGH2SO4/PVA gel19.795.0, 2000 cycles[58]
CNTs/MnO2/CNTs/PANINa2SO4/PVP gel24.8-[59]
Co3O4 nanowires/Ni foam/
carbon aerogel		KOH/PVA gel17.9-[60]
Mn3O4 nanoparticle/graphene/CNT/grapheneKCl/PVA gel32.786.0, 10,000 cycles[61]
Graphene/Ni(OH)2/graphene/CNTKOH/PVA gel18-[62]
MoO3/rGO/CC/MnO2/CCNa2SO4/PVA gel32.188.1, 6000 cycles This work
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Li, S.; Li, Z. Flexible Asymmetric Supercapacitors Constructed by Reduced Graphene Oxide/MoO3 and MnO2 Electrochemically Deposited on Carbon Cloth. Molecules 2024, 29, 3116. https://doi.org/10.3390/molecules29133116

AMA Style

Li S, Li Z. Flexible Asymmetric Supercapacitors Constructed by Reduced Graphene Oxide/MoO3 and MnO2 Electrochemically Deposited on Carbon Cloth. Molecules. 2024; 29(13):3116. https://doi.org/10.3390/molecules29133116

Chicago/Turabian Style

Li, Sha, and Zhiying Li. 2024. "Flexible Asymmetric Supercapacitors Constructed by Reduced Graphene Oxide/MoO3 and MnO2 Electrochemically Deposited on Carbon Cloth" Molecules 29, no. 13: 3116. https://doi.org/10.3390/molecules29133116

Article Metrics

Back to TopTop