Mechanical Analysis of 3D Printed Polyamide Composites under Different Filler Loadings
Abstract
:1. Introduction
2. Experimental Method
2.1. Materials and PACF Preparations
2.2. Characterisation of PACF Composites
3. Effects of Filament Performance on Carbon Fibre Addition
Sample Name | Printing Temperature (°C) | Printing Speed (mm/s) | Layer Height (cm) | Tensile Strength (MPa) |
---|---|---|---|---|
S1 | 230 | 50 | 0.4 | 35.85 |
S2 | 250 | 30 | 0.1 | 31.13 |
S3 | 230 | 50 | 0.2 | 37.51 |
S4 | 210 | 70 | 0.3 | 16.28 |
S5 | 230 | 16 | 0.2 | 33.52 |
S6 | 210 | 30 | 0.1 | 26.54 |
S7 | 230 | 50 | 0.2 | 40.30 |
S8 | 196 | 50 | 0.2 | 22.99 |
S9 | 210 | 30 | 0.3 | 28.08 |
S10 | 250 | 30 | 0.3 | 25.76 |
S11 | 230 | 50 | 0.1 | 31.56 |
S12 | 250 | 70 | 0.1 | 32.50 |
S13 | 230 | 50 | 0.2 | 33.15 |
S14 | 230 | 50 | 0.2 | 37.99 |
S15 | 210 | 70 | 0.1 | 36.56 |
S16 | 230 | 83 | 0.2 | 29.38 |
S17 | 263 | 50 | 0.2 | 35.47 |
S18 | 250 | 70 | 0.3 | 41.98 |
S19 | 230 | 50 | 0.2 | 25.47 |
S20 | 230 | 50 | 0.2 | 44.17 |
4. Mechanical Performance of Printed PACF Composites
5. Conclusions and Future Perspectives on Polymeric Composite Filaments
Author Contributions
Funding
Institutional Review Board Statement
Informed Consent Statement
Data Availability Statement
Acknowledgments
Conflicts of Interest
References
- Kuclourya, T.; Monroy, R.; Castillo, M.; Baca, D.; Ahmad, R. Design of a Hybrid High-Throughput Fused Deposition Modeling System for Circular Economy Applications. Clean Technol. Recycl. 2022, 2, 170–198. [Google Scholar] [CrossRef]
- Chan, B.Q.Y.; Chong, Y.T.; Wang, S.; Lee, C.J.J.; Owh, C.; Wang, F.; Wang, F.K. Synergistic Combination of 4D Printing and Electroless Metallic Plating for the Fabrication of a Highly Conductive Electrical Device. Chem. Eng. J. 2022, 430, 132513. [Google Scholar] [CrossRef]
- Hine, P.J.; Davidson, N.; Duckett, R.A.; Ward, I.M. Measuring the Fibre Orientation and Modelling the Elastic Properties of Injection-Moulded Long-Glass-Fibre-Reinforced Nylon. Compos. Sci. Technol. 1995, 53, 125–131. [Google Scholar] [CrossRef]
- Rijckaert, S.; Daelemans, L.; Cardon, L.; Boone, M.; van Paepegem, W.; de Clerck, K. Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication. Polymers 2022, 14, 298. [Google Scholar] [CrossRef] [PubMed]
- Liu, Z.; Lei, Q.; ** in the Case of ABS. Materials 2021, 14, 7070. [Google Scholar] [CrossRef]
- Belei, C.; Joeressen, J.; Amancio-Filho, S.T. Fused-Filament Fabrication of Short Carbon Fiber-Reinforced Polyamide: Parameter Optimization for Improved Performance under Uniaxial Tensile Loading. Polymers 2022, 14, 1292. [Google Scholar] [CrossRef]
- Abderrafai, Y.; Hadi Mahdavi, M.; Sosa-Rey, F.; Hérard, C.; Otero Navas, I.; Piccirelli, N.; Lévesque, M.; Therriault, D. Additive Manufacturing of Short Carbon Fiber-Reinforced Polyamide Composites by Fused Filament Fabrication: Formulation, Manufacturing and Characterization. Mater. Des. 2022, 214, 110358. [Google Scholar] [CrossRef]
- Tanveer, M.Q.; Haleem, A.; Suhaib, M. Effect of Variable Infill Density on Mechanical Behaviour of 3-D Printed PLA Specimen: An Experimental Investigation. SN Appl. Sci. 2019, 1, 1701. [Google Scholar] [CrossRef] [Green Version]
- Fayazbakhsh, K.; Movahedi, M.; Kalman, J. The Impact of Defects on Tensile Properties of 3D Printed Parts Manufactured by Fused Filament Fabrication. Mater. Today Commun. 2019, 18, 140–148. [Google Scholar] [CrossRef]
- Peng, Y.; Wu, Y.; Wang, K.; Gao, G.; Ahzi, S. Synergistic Reinforcement of Polyamide-Based Composites by Combination of Short and Continuous Carbon Fibers via Fused Filament Fabrication. Compos. Struct. 2019, 207, 232–239. [Google Scholar] [CrossRef]
- Ehrmann, G.; Ehrmann, A. Pressure Orientation-Dependent Recovery of 3D-Printed PLA Objects with Varying Infill Degree. Polymers 2021, 13, 1275. [Google Scholar] [CrossRef] [PubMed]
- Peng, X.; Zhang, M.; Guo, Z.; Sang, L.; Hou, W. Investigation of Processing Parameters on Tensile Performance for FDM-Printed Carbon Fiber Reinforced Polyamide 6 Composites. Compos. Commun. 2020, 22, 100478. [Google Scholar] [CrossRef]
- Sezer, H.K.; Eren, O. FDM 3D Printing of MWCNT Re-Inforced ABS Nano-Composite Parts with Enhanced Mechanical and Electrical Properties. J. Manuf. Process. 2019, 37, 339–347. [Google Scholar] [CrossRef]
- Jung, Y.C.; Bhushan, B. Contact Angle, Adhesion and Friction Properties of Micro-and Nanopatterned Polymers for Superhydrophobicity. Nanotechnology 2006, 17, 4970–4980. [Google Scholar] [CrossRef]
- Eustathopoulos, N.; Sobczak, N.; Passerone, A.; Nogi, K. Measurement of Contact Angle and Work of Adhesion at High Temperature. J. Mater. Sci. 2005, 40, 2271–2280. [Google Scholar] [CrossRef]
- Kang, B.; Hyeon, J.; So, H. Facile Microfabrication of 3-Dimensional (3D) Hydrophobic Polymer Surfaces Using 3D Printing Technology. Appl. Surf. Sci. 2020, 499, 143733. [Google Scholar] [CrossRef]
- Hou, Y.; Panesar, A. Effect of Manufacture-Induced Interfaces on the Tensile Properties of 3D Printed Polyamide and Short Carbon Fibre-Reinforced Polyamide Composites. Polymers 2023, 15, 773. [Google Scholar] [CrossRef] [PubMed]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
Mohd Radzuan, N.A.; Khalid, N.N.; Foudzi, F.M.; Rajendran Royan, N.R.; Sulong, A.B. Mechanical Analysis of 3D Printed Polyamide Composites under Different Filler Loadings. Polymers 2023, 15, 1846. https://doi.org/10.3390/polym15081846
Mohd Radzuan NA, Khalid NN, Foudzi FM, Rajendran Royan NR, Sulong AB. Mechanical Analysis of 3D Printed Polyamide Composites under Different Filler Loadings. Polymers. 2023; 15(8):1846. https://doi.org/10.3390/polym15081846
Chicago/Turabian StyleMohd Radzuan, Nabilah Afiqah, Nisa Naima Khalid, Farhana Mohd Foudzi, Nishata Royan Rajendran Royan, and Abu Bakar Sulong. 2023. "Mechanical Analysis of 3D Printed Polyamide Composites under Different Filler Loadings" Polymers 15, no. 8: 1846. https://doi.org/10.3390/polym15081846